
Control Systems With Integrated Software
Video Visitation
The MTI Video Visitation Unit is a cost effective solution for video visitation. It requires minimal time out in the field for assembly and mounting. The unit comes pre-assembled from the factory. All that is required is mounting the unit to the wall using the bracket provided with the unit. The unit provides maximum flexibility while not compromising security. All components are secured within the 14 gauge housing.
This unit is also very
reliable and easy to maintain and service. All components can be accessed by
simply taking the top off of the unit. There is no need to dismount the unit
from the wall in order to service any component. Reliability is ensured by
keeping the parts in the unit to a minimum.
The unit houses a 17” LCD monitor and a 380 TV LOR camera protected by a
3/8” thick sheet of Plexiglass. Full duplexed audio is provided using a
Walker hearing aid compatible handset with volume control. The handset is
securely fastened to the unit using a 29” armored cable. A magnetic hanger
is used for maximum stability (no moving parts to tear up). The unit simply
requires two surge protected 120V AC outlets and a 10Mb network connection.
The video and audio are digitized and compressed into a MPEG4 stream at the unit providing real time operation. The maximum data rate per unit is 120kbps.
The units are controlled by a control station, typically a standard MTI PC, using MTI Video Visitation software.
Monitor Specs
§
Viewable Size:
17.0”
§
Pixel Pitch:
.264mm
§
Brightness:
300 cd/m2
§
Contrast Ratio:
600:1
§
Viewing Angle
(Horizontal/Vertical): 160o/160o
§
Native Resolution:
1280 x 1024
§
Aspect Ratio:
5:4
§
Maximum
Color: 16.2M
§
Interface:
Analog
§
Input Video Signal:
Analog RGB
§
Input Connectors:
15-Pin D-Sub
§
Power Consumption:
34 watts (max), <1 watt (DPMS Mode)
